Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

5″ Heat Shrink FEP Roll Cover

ItemHeat Shrink Specification
Part5 FEP Roll Cover
MaterialFEP
Mil - SpecASTM D2902 TYPE II
Ratio1.25:1
ColorClear
Nominal Size5
Expanded ID5.200
Recovered ID4.300
Wall.020 +/- .003
Lengthsup to 10 ft
Max Service Temp400 °F
BondableUpon Request
Teflon Heat Shrink FEP Roll Cover

Heat Shrink FEP Roll Covers are easier to shrink than PTFE and can withstand temperatures as high as 400°F (204°C). Shrinkable FEP Tubing is supplied in an expanded state to allow easy coverage over instruments such as Thermocouples, Probes, Thermometers, Lighting Fixtures and other delicate electrical instruments where protection is needed. FEP provides a tight seal around components, protecting them from harsh chemical environments. As a protective sleeve, FEP helps eliminates dirt and contamination build up on components.

Tef Cap Industries manufactures both Mil-Spec and Custom Heat Shrink Tubing in FDA and USP Class VI Compliant resins such as FEP, PFA and PTFE.

Heat Shrink FEP Roll Covers Specifications:

  • Tubing produced from 100 % Virgin FEP (Fluorinated Ethylene Propylene) resins.
  • Supplied in lengths from 2 ft to 10 ft.
  • Shrink Temperature: Below 1.00” Diameter – 410°F/210°C – Over 1.00” Diameter – 430°F/221°C.
  • Color: Clear / Translucent, Custom Colors are available.
  • FEP 1:3 – AMS-DTL-23053/11 Class 1
  • FEP 1:6 – AMS-DTL-23053/11 Class 2
  • FDA Compliant
  • USP Class VI Compliant
  • Reach & RoHs Compliant
  • VW1, UL-83

Heat Shrink FEP Roll Covers Applications:

  • Protective Covering For Components
  • Electrical Insulation
  • Laminating / Conveyor Rollers
  • T5,T8,T12 Light Covering
  • Dryer Cans
  • Battery Packs
  • Print Rollers

Heat Shrink FEP Roll Covers Characteristics:

  • Biocompatible, FEP is certified USP Class VI
  • Maximum heat resistance up to 400°F (204°C)
  • Chemically inert to nearly all industrial chemicals and solvents
  • Eliminates dirt and contamination build up on components
  • Lower gas and vapor permeability than PTFE
  • Low absorption of solvents (< 1%)
  • Gamma, ETO, e-beam and autoclave sterilizable
  • Excellent transmission of ultraviolet rays
  • Self-extinguishing
  • Non-wetting

Request A Quick Quote

Leave this field blank

Office Location

Tef Cap Industries
1155 Phoenixville Pike
Suite 103
West Chester, PA 19380

Phone : 610-692-2576