Standard Wall PTFE Tubing • AWG
Tef Cap’s Standard Wall AWG PTFE Tubing is 100 % chemical inert and excellent heat resistance as well as superior dielectric strength. PTFE Tubing is self-extinguishing, water resistant, non-wetting and non-corrosive. Standard Wall PTFE Tubing has is unlimited in its possibilities, ranging from applications in aerospace wire harnesses and computer component covering. PTFE has the lowest coefficient of friction of any polymer and has a broad temperature range allowing it to excel equally in extreme cold and hot environments.
Standard Wall PTFE Tubing has also been widely used in 3D Printing applications.
Standard Wall PTFE Tubing has also been widely used in 3D Printing applications.
• Refrence to AMS 3653 is for wall thickness identification only.
| Size | Minimum ID | Nominal ID | Maximum ID | Nominal Wall |
|---|---|---|---|---|
| AWG 32 | .008 | .010 | .012 | .005 +/- .002 |
| AWG 30 | .010 | .012 | .015 | .009 +/- .002 |
| AWG 28 | .013 | .015 | .018 | .009 +/- .002 |
| AWG 26 | .016 | .018 | .021 | .009 +/- .002 |
| AWG 24 | .020 | .022 | .026 | .012 +/- .002 |
| AWG 23 | .023 | .026 | .029 | .012 +/- .002 |
| AWG 22 | .025 | .028 | .032 | .012 +/- .002 |
| AWG 21 | .029 | .032 | .035 | .012 +/- .002 |
| AWG 20 | .032 | .034 | .038 | .016 +/- .003 |
| AWG 19 | .036 | .038 | .042 | .016 +/- .003 |
| AWG 18 | .040 | .042 | .046 | .016 +/- .003 |
| AWG 17 | .045 | .047 | .052 | .016 +/- .003 |
| AWG 16 | .051 | .053 | .058 | .016 +/- .003 |
| AWG 15 | .057 | .059 | .065 | .016 +/- .003 |
| AWG 14 | .064 | .066 | .072 | .016 +/- .003 |
| AWG 13 | .072 | .076 | .081 | .016 +/- .003 |
| AWG 12 | .081 | .085 | .091 | .016 +/- .003 |
| AWG 11 | .091 | .095 | .101 | .016 +/- .003 |
| AWG 10 | .102 | .106 | .112 | .016 +/- .003 |
| AWG 9 | .114 | .118 | .124 | .020 +/- .004 |
| AWG 8 | .129 | .133 | .139 | .020 +/- .004 |
| AWG 7 | .144 | .148 | .155 | .020 +/- .004 |
| AWG 6 | .162 | .166 | .174 | .020 +/- .004 |
| AWG 5 | .182 | .186 | .195 | .020 +/- .004 |
| AWG 4 | .204 | .208 | .218 | .020 +/- .004 |
| AWG 3 | .229 | .234 | .244 | .020 +/- .004 |
| AWG 2 | .258 | .263 | .273 | .020 +/- .004 |
| AWG 1 | .289 | .294 | .305 | .020 +/- .004 |
| AWG 0 | .325 | .330 | .342 | .020 +/- .004 |