Heat Shrink Tubing
Heat shrink tubes are a vital component of most electrical engineering projects. These tubes protect the electrical wires you work on from a host of impacts that wires will naturally be exposed to over time. To keep your wires as unexposed as possible, rely on the heat shrink tubing we offer here at Tef-Cap Industries.
We’ve worked with heat shrink and extruded fluoropolymer tubing since the 1960s, so Tef-Cap Industries has the experience you can rely on. You can rest assured that our heat shrink tubing will keep your wires protected and prolong their life.
Our Heat Shrink Tubes
We offer heat shrink tubing for a variety of wire gauges so that every wire you work with can be protected from wear, tear, and damage.
Browse our heat shrink tubing options below — or reach out to us about a custom product for your project. Order the tubes you need for your project today.
General Specifications : Insulation Sleeving, Electrical, Heat Shrinkable.
This specification establishes the requirements for various types and colors of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat. This specification includes provisions for demonstrating compliance with qualification requirements, in process inspection, and statistical process control inspections. The continuous operating temperature ranges for the sleeving classes covered by this specification are from -112 to +482 °F (-80 to +250 °C). The continuous operating temperature range for each sleeving class is given in the applicable detail specification.
• Heat Shrinkable Polyolefin, Dual-Wall With Adhesive, Rigid Outer Wall Crosslinked
• Material Type : Heat Shrink Polyolefin
• Class 1 : High Shrink Ratio (3:1), Dual Wall, Semi Rigid
• Class 2 : Shrink Ratio (2:1), Dual Wall, Flexible
• Class 3 : High Shrink Ratio (3:1), Dual Wall, Flame Retardant
• Class 3 : High Shrink Ratio (4:1), Dual Wall, Flexible
• Heat Shrinkable Polyolefin, Flexible, Crosslinked.
• Material Type : Heat Shrink Polyolefin
• Class 1 & 3 : Shrink Ratio (2:1), Single Wall, Flexible, Flame Retardant
• Class 2 : Shrink Ratio (2:1), Single Wall, Flexible, Flame Retardant ( Color : Clear )
• Heat Shrinkable Polyvinylidene Fluoride, Semi-Rigid, Crosslinked.
• Material Type : Heat Shrink Kynar (PVF2)
• Shrink Ratio (2:1), Single Wall, High Temperature, Chemical Resistant
• Heat Shrinkable (FEP) Fluorinated Ethylene Propylene, Non-Crosslinked.
• Material Type : Heat Shrink FEP
• Class 1 : Shrink Ratio ( FEP 1.3:1 )
• Class 2 : Shrink Ratio ( FEP 1.6:1 )
• Heat Shrinkable (PTFE) Polytetrafluoroethylene.
• Material Type : Heat Shrink PTFE
• Class 1 : Industrial Wall PTFE Tubing, Shrink Ratio ( PTFE 2:1 )
• Class 2 : Standard Wall PTFE Tubing, Fractional & AWG, Shrink Ratio ( PTFE 2:1 )
• Class 3 : Thin Wall PTFE Tubing, Fractional & AWG, Shrink Ratio ( PTFE 2:1 )
• Class 4 : Light Wall PTFE Tubing, Fractional & AWG, Shrink Ratio ( PTFE 2:1 )
• Class 5 : Fractional, Shrink Ratio ( PTFE 4:1 )
• Heat Shrinkable (ETFE) Ethylene-Tetrafluoroethylene Fluoropolymer, SemiRigid.
• Material Type : Heat Shrink ETFE
• Class 1 : Shrink Ratio ( ETFE 1.5:1 )
MIL-DTL-23053 Complete Detail Specifications
Specification | Classification |
---|---|
MIL-23053/1 | Heat Shrink Sleeving For Electrical Insulation, Chlorinated Polyolefin, Crosslinked, Flexible. |
MIL-23053/2 | Heat Shrink Sleeving For Electrical Insulation,Polyvinyl Chloride, Flexible, Crosslinked and NonCrosslinked (Inactive for New Design). |
MIL-23053/3 | Heat Shrink Sleeving For Electrical Insulation, Polyvinyl Chloride, Semi-Rigid, Crosslinked and Non Crosslinked (Inactive for New Design). |
MIL-23053/4 | Heat Shrink Sleeving For Electrical Insulation, Polyolefin, Dual-Wall, Rigid Outer Wall Crosslinked. |
MIL-23053/5 | Heat Shrink Sleeving For Electrical Insulation, Polyolefin, Flexible, Crosslinked. |
MIL-23053/6 | Heat Shrink Sleeving For Electrical Insulation, Polyolefin, Semi-Rigid, Crosslinked. |
MIL-23053/7 | Heat Shrink Sleeving For Electrical Insulation, Polyethylene Terephthalate, Non-Crosslinked. |
MIL-23053/8 | Heat Shrink Sleeving For Electrical Insulation, Polyvinylidene Fluoride, Semi-Rigid, Crosslinked. |
MIL-23053/9 | Heat Shrink Sleeving For Electrical Insulation, Fluorosilicone Rubber, Flexible (CANCELLED). |
MIL-23053/10 | Heat Shrink Sleeving For Electrical Insulation, Silicone Rubber, Flexible. |
MIL-23053/11 | Heat Shrink Sleeving For Electrical Insulation, Fluorinated Ethylene Propylene, Non-Crosslinked. |
MIL-23053/12 | Heat Shrink Sleeving For Electrical Insulation, Polytetrafluoroethylene. |
MIL-23053/13 | Heat Shrink Sleeving For Electrical Insulation, Fluoroeleastomer, Flexible |
MIL-23053/14 | Heat Shrink Sleeving For Electrical Insulation, Ethylene-Tetrafluoroethylene Fluoropolymer, SemiRigid. |
MIL-23053/15 | Heat Shrink Sleeving For Electrical Insulation, Polyolefin, Heavy Wall, Coated, Flexible, Outer Wall Crosslinked. |
MIL-23053/16 | Heat Shrink Sleeving For Electrical Insulation, Crosslinked, Elastomeric Polyolefin, Flexible. |
MIL-23053/17 | Heat Shrink Sleeving For Electrical Insulation, Flame Retarded, Modified Polyolefin, Flexible Crosslinked. |
MIL-23053/18 | Heat Shrink Sleeving For Electrical Insulation, Modified Fluoropolymer, Crosslinked. |