Generic selectors
Exact matches only
Search in title
Search in content

8″ Heat Shrink FEP Roll Cover

ItemHeat Shrink Specification
Part8 FEP Roll Cover
MaterialFEP
Mil - SpecASTM D2902 TYPE II
Ratio1.25:1
ColorClear
Nominal Size8
Expanded ID8.300
Recovered ID7.200
Wall.020 +/- .003
Lengthsup to 10 ft
Max Service Temp °F400
BondableUpon Request
Teflon Heat Shrink FEP Roll Cover
Heat Shrink FEP Roll Covers are produced in straight length to avoid and kinks or creases. Manufactured and stocked in lengths up to 10 ft. Longer lengths also available upon special quotation. FEP Roll covers also come with the option of being supplied etched with adhesive for bonding. Heat Shrink FEP Roll Covers are easier to shrink than PTFE and can withstand temperatures as high as 400°F (204°C). Shrinkable FEP Tubing is supplied in an expanded state to allow easy coverage over instruments such as Thermocouples, Probes, Thermometers, Lighting Fixtures and other delicate electrical instruments where protection is needed. FEP provides a tight seal around components, protecting them from harsh chemical environments. As a protective sleeve, FEP helps eliminates dirt and contamination build up on components. Tef Cap Industries manufactures both Mil-Spec and Custom Heat Shrink Tubing in FDA and USP Class VI Compliant resins such as FEP, PFA and PTFE.
Heat Shrink FEP Roll Covers Specifications:
Tubing produced from 100 % Virgin FEP (Fluorinated Ethylene Propylene) resins. Supplied in lengths from 2 ft to 10 ft. Shrink Temperature: Below 1 “Diameter – 410°F/210°C – Over 1″ Diameter – 430°F/221°C. Color: Clear / Translucent, Custom Colors are available. FEP 1:3 – AMS-DTL-23053/11 Class 1 FEP 1:6 – AMS-DTL-23053/11 Class 2 FDA Compliant USP Class VI Compliant Reach & RoHs Compliant VW1, UL-83
Heat Shrink FEP Roll Covers Applications:
Protective Covering For Components Electrical Insulation Laminating / Conveyor Rollers T5,T8,T12 Light Covering Dryer Cans Battery Packs Print Rollers
Heat Shrink FEP Roll Covers Characteristics:
Biocompatible, FEP is certified USP Class VI Maximum heat resistance up to 400°F (204°C) Chemically inert to nearly all industrial chemicals and solvents Eliminates dirt and contamination build up on components Lower gas and vapor permeability than PTFE Low absorption of solvents (< 1%) Gamma, ETO, e-beam and autoclave sterilizable Excellent transmission of ultraviolet rays Self-extinguishing Non-wetting

Request A Quick Quote

Request A Quick Quote

  • Extruded Tubing
  • Convoluted Tubing
  • Heat Shrink Tubing
  • Probe Covers
  • Other
  • Min Order
  • 100 to 200 ft
  • 200 to 500 ft
  • 500 to 1000 ft
  • Other

Office Location

Tef - Cap Industries Inc.
Park Valley Corporate Center
1155 Phoenixville Pike
Suite 103
West Chester, PA 19380
Phone : 610-692-2576
Mon-Fri : 8:00-5:00