AWG 1 Heat Shrink FEP Tubing 1.3:1 • AMS-DTL-23053/11-117
Item | Heat Shrink Specification |
---|---|
Part | AWG # 1 Heat Shrink FEP |
Mil-Spec | 23053/11-117 |
Ratio | 1.3:1 |
Material | FEP |
Size | AWG 1 |
Expanded ID | .400 |
Recovered ID | .311 |
Wall | .012 +/- .004 |
Color | Clear |
Put Up | 4 ft / Coils |
Max. Temp. | 400º F |

Manufacturing Heat Shrinkable Fluoropolymer Tubing that conforms to both Military Specs: AMS-DTL-23053/12 and AMS-DTL-23053/11. Heat Shrinkable PTFE 2:1 and 4:1. Heat Shrinkable FEP 1.25:1 , 1.3:1 and 1.6:1 products. Manufactured in the USA.
Heat Shrink FEP Tubing is easier to shrink than PTFE and can withstand temperatures as high as 400°F (204°C). Shrinkable FEP Tubing is supplied in an expanded state to allow easy coverage over instruments such as Thermocouples, Probes, Thermometers, Lighting Fixtures and other delicate electrical instruments where protection is needed. FEP provides a tight seal around components, protecting them from harsh chemical environments. As a protective sleeve, FEP helps eliminates dirt and contamination build up on components.
Tef Cap Industries manufactures both Mil-Spec and Custom Heat Shrink Tubing in FDA and USP Class VI Compliant resins such as FEP, PFA and PTFE.
FEP Heat Shrink Tubing (M23053/11) specifications:
Tubing produced from 100 % Virgin FEP (Fluorinated Ethylene Propylene) resins.
Supplied in 4 ft lengths, or Long Continuous Lengths.
Shrink Temperature: Below 1 “Diameter – 410°F/210°C – Over 1″ Diameter – 430°F/221°C.
Color: Clear / Translucent, Custom Colors are available.
FEP 1:3 – AMS-DTL-23053/11 Class 1
FEP 1:6 – AMS-DTL-23053/11 Class 2
FDA Compliant
USP Class VI Compliant
Reach & RoHs Compliant
VW1, UL-83
FEP Heat Shrink Tubing (M23053/11) Applications:
Protective covering for components
Electrical insulation
Laminating / Conveyor Rollers
T5,T8,T12 Light Covering
Medical instruments
Catheter construction
Battery packs
FEP Shrink Tubing (M23053/11) Characteristics:
Biocompatible, FEP is certified USP Class VI
Maximum heat resistance up to 400°F (204°C)
Chemically inert to nearly all industrial chemicals and solvents
Eliminates dirt and contamination build up on components
Lower gas and vapor permeability than PTFE
Low absorption of solvents (< 1%)
Gamma, ETO, e-beam and autoclave sterilizable
Excellent transmission of ultraviolet rays
Long continuous lengths can be produced
Self-extinguishing
Non-wetting