Generic selectors
Exact matches only
Search in title
Search in content

AWG 18 Heat Shrink FEP Tubing 1.3:1 • AMS-DTL-23053/11-104

ItemHeat Shrink Specification
PartAWG # 18 Heat Shrink FEP
Mil-Spec23053/11-104
Ratio1.3:1
MaterialFEP
SizeAWG 18
Expanded ID.060
Recovered ID.049
Wall.008 +/- .002
ColorClear
Put Up4 ft / Coils
Max. Temp.400º F
FEP Heat Shrink Tubing / FEP Heat Shrinkable Tubing 1.6:1

Manufacturing Heat Shrinkable Fluoropolymer Tubing that conforms to both Military Specs: AMS-DTL-23053/12 and AMS-DTL-23053/11. Heat Shrinkable PTFE 2:1 and  4:1. Heat Shrinkable FEP 1.25:1 , 1.3:1 and 1.6:1 products. Manufactured in the USA.

Heat Shrink FEP Tubing is easier to shrink than PTFE and can withstand temperatures as high as 400°F (204°C). Shrinkable FEP Tubing is supplied in an expanded state to allow easy coverage over instruments such as Thermocouples, Probes, Thermometers, Lighting Fixtures and other delicate electrical instruments where protection is needed. FEP provides a tight seal around components, protecting them from harsh chemical environments. As a protective sleeve, FEP helps eliminates dirt and contamination build up on components.

Tef Cap Industries manufactures both Mil-Spec and Custom Heat Shrink Tubing in FDA and USP Class VI Compliant resins such as FEP, PFA and PTFE.

FEP Heat Shrink Tubing (M23053/11) specifications:

Tubing produced from 100 % Virgin FEP (Fluorinated Ethylene Propylene) resins.
Supplied in 4 ft lengths, or Long Continuous Lengths.
Shrink Temperature: Below 1 “Diameter – 410°F/210°C – Over 1″ Diameter – 430°F/221°C.
Color: Clear / Translucent, Custom Colors are available.
FEP 1:3 – AMS-DTL-23053/11 Class 1
FEP 1:6 – AMS-DTL-23053/11 Class 2
FDA Compliant
USP Class VI Compliant
Reach & RoHs Compliant
VW1, UL-83

FEP Heat Shrink Tubing (M23053/11) Applications:

Protective covering for components
Electrical insulation
Laminating / Conveyor Rollers
T5,T8,T12 Light Covering
Medical instruments
Catheter construction
Battery packs

FEP Shrink Tubing (M23053/11) Characteristics:

Biocompatible, FEP is certified USP Class VI
Maximum heat resistance up to 400°F (204°C)
Chemically inert to nearly all industrial chemicals and solvents
Eliminates dirt and contamination build up on components
Lower gas and vapor permeability than PTFE
Low absorption of solvents (< 1%)
Gamma, ETO, e-beam and autoclave sterilizable
Excellent transmission of ultraviolet rays
Long continuous lengths can be produced
Self-extinguishing
Non-wetting

Request A Quick Quote

Request A Quick Quote

  • Extruded Tubing
  • Convoluted Tubing
  • Heat Shrink Tubing
  • Probe Covers
  • Other
  • Min Order
  • 100 to 200 ft
  • 200 to 500 ft
  • 500 to 1000 ft
  • Other

Office Location

Tef - Cap Industries Inc.
Park Valley Corporate Center
1155 Phoenixville Pike
Suite 103
West Chester, PA 19380
Phone : 610-692-2576
Mon-Fri : 8:00-5:00